Saturday, December 13, 2014

Johnny, sleep like a god tonight!



A couple of months ago has arrived in our family Johnny, a four months old Beagle. 
I always thought, if a new born was arrived a day, I should have to make a cradle but never I would have imagined I should have build a dog kennel! 




The job was easy; I utilized mainly recycled wood and pine wood paneling (2 cm thick) for sides and roof.
Simple joinery by lap joints, some brass screws and dowels make this project really easy to realize. 







The pitched sunroof (slightly asymmetric) helps to access to the internal zone. The panels are not glued and are stopped by a thin internal nailed frame. The rebates are obtained by gluing 30x10 mm elements to the external frame (6 mm dowels secure the frame in place).     



 This kennel has been built thinking for an external collocation. The roof is impermeable, being treated with a special plasticized varnish; a ridge avoids to the rain of penetrating between the two movable roof panels.
The entry door is decentralized, so the dog can find more repair from wind and cold. Some gum strips cover the opening, offering more repair but easy access.
I added wheels to the structure in order to move it easily.
Here in South of Italy the temperature is not too low, even in winter.
However, in the case it lowered overnight, a small fan heater and a thermostat avoid too much low values.



The wood has been treated with two coats of cementite and two coats of covering paint.
The flag is a tribute to Beagle origins.....




Here he is, shooted by camera....a little bit confused, but after awhile the kennel has become his preferred shelter.
Johnny, I am sure, you will sleep as a god, tonight!!







The project sketch up file can be downloaded here:

 https://app.box.com/s/tiq5j7wvejrf9srprxh9




1 comment:

Note: Only a member of this blog may post a comment.