Planemaking Progress

Recently, I am enjoying in building woodies from a single wooden block.

Coffin Plane (Smoother), beech body, 50° seat, bubinga wedge:

Jack Plane, beech body, 50° seat, cherry wedge and tote, wengè strike button.

Some live shaves by Jack plane.

 

Tha Cold War is Finished for Planes Too

Giovanni, a friend of mine, kindly gave me a Russian plane as gift. I heard some negative opinions about and this models are not so frequent. Unluckily, the blade and cap iron were not original and the plane came equipped with a recent Stanley iron and cap. Iron is 2" wide and the plane is about 10" long, so a smoothing plane. 
The body is cast iron, well done; the hard wood handles offer a comfortable grip but have curious nuts requiring a dedicate screwdriver. 

Not a common future, the knob is inclined forward and I found the grip more comfortable than an ordinary one. More, it helps to provide more pressure on the anterior plane portion when the plane shot has incoming.


                                                       

 

I had to add a washer to the rear handle for fixing it better. 

The aluminium frog shows a fine surface on which the blade seats well.
It can be moved like the Bailey planes. The frog did not seat well on the base, so I had to use a file for slightly trueing the critical points.

The Y lever is malleable iron, too much thin and with a lot of lateral tolerance.

The lateral lever is very short and this does not permit of moving the iron easily.
I changed the iron, utilizing a vintage Stanley iron and chipbreaker. 

Of course was necessary to do some corrections, such as the lateral lever substitution with another one longer, the thickening of Y lever where it engages the chipbreaker (I used a little bit of soldering material).

I flattened the sole, sharpened the blade and tried the plane.

Despite the defects, I obtained thin shaves on soft woods as well as on harder ones.

Unfortunately I cannot verify the quality and performances of original blade and chipbreaker, but after all this Russian plane (with a good blade) showed capability for a fine job, although the regulation systems were quite weak and could cause troubles with a harder use.

A Russian body with an American heart. It works!